Identify and alert to the presence of water near critical infrastructure before it causes damage. Integrated sensor, controller, and alarm monitoring systems for 24/7 protection.
Water is one of the most overlooked threats to critical infrastructure. A single undetected leak can cause catastrophic damage within minutes.
Even small amounts of water can permanently damage servers, switches, UPS units, and other high-value IT assets.
Water damage leads to unplanned outages, SLA breaches, and recovery costs that far exceed the cost of a detection system.
Structural damage to raised floors, cabling, and building systems from prolonged water exposure.
Water ingress from cooling leaks or external sources can trigger fire suppression or disable security systems.
Choose the right detection approach for your site's layout and requirements.
Detects AND pinpoints the exact location of a water leak to within ±1 meter precision.
The locating water leak detection system uses detection panels and sensor modules programmed to detect and pinpoint leak locations with ±1m precision. Detection panels connect to supervising displays where data is visualized via a customized virtual map, allowing operators to immediately identify the exact leak location and dispatch a response.
Central controller that processes sensor signals, calculates leak position, and triggers alarms.
Water-sensitive rope or tape routed along at-risk areas — under raised floors, around cooling units, and beneath pipe runs.
Visual interface with customized virtual map showing the exact zone and distance of any leak detected.
Area/zone-based water presence detection with visual inspection alert.
The non-locating water leak detection system provides area and zone-based detection of water presence, alerting operators to visually inspect the identified zone. Typically deployed in defined zones such as beneath specific aisles or around cooling units, it is a cost-effective approach for areas with clear access for rapid visual inspection.
Point-type sensors placed in critical locations to detect the presence of water and trigger zone alarms.
Aggregates alarm signals from multiple sensors within a zone and activates audible/visual alerts and notifications.
Audible and visual alarm output with relay contact for integration with BMS, DCIM, or facility management systems.
Water can enter or collect in many areas — here's where to protect first.
Under server room raised floors where water from cooling systems or plumbing leaks can pool undetected.
Around precision air conditioning units prone to condensate overflow or refrigerant leaks.
Along water-cooled rack or chilled water distribution piping and connection points.
At doors, loading docks, and cable penetrations where water ingress from outside is possible.
Around UPS battery banks where electrolyte or cooling water leaks require immediate detection.
Above suspended ceilings in spaces prone to roof leaks or condensation from HVAC equipment.
Our engineers will assess your facility's risk zones and design the right detection system for complete coverage.
Get a Site Assessment